Roofing Services

• Three-tab shingles
• Architectural shingles

• Preparation:
  • Remove old roofing material.
  • Inspect and repair the roof deck if necessary.
  • Install drip edge along the eaves.
• Underlayment:
  • Roll out and secure the roofing felt or underlayment.

Starter Shingles:

• Install starter strip shingles along the eaves.
• Shingle Installation:
  • Lay the first row of shingles over the starter strip.
  • Continue laying shingles, ensuring they overlap correctly.
  • Nail shingles into place, typically with four nails per shingle.
• Flashing:
  • Install flashing around roof penetrations (chimneys, vents, etc.).
• Ridge Shingles:
  • Install ridge shingles along the roof's peak.

• Standing seam
• Corrugated metal panels
• Metal shingles

• Preparation:
  • Remove old roofing material.
  • Install roofing underlayment.
• Drip Edge:
  • Install the drip edge along the eaves and gables.
• Panel Installation:
  • Position the first metal panel and secure it with screws.
  • Ensure panels overlap properly to prevent water infiltration.
• Flashing:
  • Install flashing around roof penetrations and along the roof’s valleys.
• Ridge Cap:
  • Install a ridge cap along the roof’s peak.

• Preparation:
  • Remove old roofing material.
  • Install roofing underlayment and battens.
• Starter Course:
  • Install the first row of tiles along the eaves.
• Tile Installation:
  • Lay tiles in rows, securing each tile with nails or clips.
  • Ensure tiles are properly aligned and overlapping.
• Ridge Tiles:
  • Install ridge tiles along the roof’s peak using mortar or adhesive.

• Preparation:
  • Remove old roofing material.
  • Install roofing underlayment.
• Slate Installation:
  • Install starter slate tiles along the eaves.
  • Lay subsequent rows of slate, securing each with copper nails.
  • Ensure proper overlap and alignment.
• Flashing:
  • Install flashing around roof penetrations.
• Ridge Slate:
  • Install ridge slate tiles along the roof’s peak.

• Preparation:
  • Remove old roofing material.
  • Install roofing underlayment.
• Starter Course:
  • Install the first row of wood shingles or shakes along the eaves.
• Shingle/Shake Installation:
  • Lay subsequent rows, ensuring proper spacing and overlap.
  • Secure each shingle/shake with two nails.
• Flashing:
  • Install flashing around roof penetrations.
• Ridge Cap:
  • Install a ridge cap using overlapping wood shingles or shakes.

• Preparation:
  • Remove old roofing material.
  • Inspect and repair the roof deck if necessary.
• Insulation:
  • Install roof insulation if required.
• Membrane Installation:
  • Lay out and secure the roofing membrane (EPDM, TPO, or PVC).
  • Use adhesive or mechanical fasteners depending on the material.
• Seaming:
  • Seal seams using the appropriate method for the membrane type.
• Flashing:
  • Install flashing around roof penetrations.