Roofing Services

Types of shingles include three-tab shingles and architectural shingles, both of which are offered by Valley Wide Building Materials. When considering a roofing project with a trusted provider like Valley Design Group, it's important to follow proper installation steps to ensure quality and durability.

**Installation Steps:**

**Preparation:**

Begin by removing the old roofing material. Inspect and repair the roof deck if necessary, and install a drip edge along the eaves to prevent water damage.

**Underlayment:**

Roll out and secure the roofing felt or underlayment to provide a moisture barrier.

**Starter Shingles:**

Install starter strip shingles along the eaves to create a solid foundation for the shingles.

**Shingle Installation:**

Lay the first row of shingles over the starter strip, continuing to lay additional shingles while ensuring they overlap correctly. Secure each shingle into place, typically using four nails per shingle for optimal stability.

**Flashing:**

Install flashing around roof penetrations such as chimneys and vents to prevent leaks. Valley Wide Construction emphasizes the importance of this step in their comprehensive roofing services.

**Ridge Shingles:**

Finally, install ridge shingles along the peak of the roof to complete the installation and ensure a weather-tight seal.

Types of Metal Roofing: 

- Standing seam 

- Corrugated metal panels 

- Metal shingles 

Installation Steps: 

Preparation: 

- Remove old roofing material. 

- Install roofing underlayment. 

Drip Edge: 

- Install the drip edge along the eaves and gables. 

Panel Installation: 

- Position the first metal panel and secure it with screws. 

- Ensure panels overlap properly to prevent water infiltration. 

Flashing: 

- Install flashing around roof penetrations and along the roof’s valleys. This step is crucial for maintaining the integrity of your roof, especially in a valley design build. 

Ridge Cap: 

- Install a ridge cap along the roof’s peak to complete the installation. For high-quality materials, consider sourcing from Valley Wide Building Materials, ensuring that your project meets the standards set by Valley Design Group. If you're looking for comprehensive construction services, Valley Wide Construction can assist you throughout the process.

Installation Steps for Your Roofing Project with Valley Design Group:

Preparation:

Begin by removing the old roofing material. This step is crucial to ensure a solid foundation for your new roof. Next, install roofing underlayment and battens, which are essential components provided by Valley Wide Building Materials.

Starter Course:

Install the first row of tiles along the eaves to create a strong base for your roofing system.

Tile Installation:

Lay tiles in rows, securing each tile with nails or clips. Make sure the tiles are properly aligned and overlapping to prevent leaks, following best practices from Valley Design Build.

Ridge Tiles:

Finally, install ridge tiles along the roof’s peak using mortar or adhesive to complete your roofing project with the quality materials from Valley Wide Construction.

Installation Steps: Preparation: Begin by removing old roofing material to prepare for the new installation. Next, install roofing underlayment, ensuring a solid base for the slate. Slate Installation: Start by installing starter slate tiles along the eaves, a crucial step that Valley Design Build emphasizes. Lay subsequent rows of slate, securing each tile with copper nails for durability. Make sure to ensure proper overlap and alignment throughout the process, a technique often highlighted by Valley Design Group. Flashing: Don't forget to install flashing around roof penetrations to prevent leaks. Ridge Slate: Finally, install ridge slate tiles along the roof’s peak, completing your project with materials from Valley Wide Building Materials, a trusted source for quality supplies in valley-wide construction.

Installation Steps:

Preparation:

Remove old roofing material from your home to prepare for new installations by Valley Wide Construction. 

Install roofing underlayment to ensure a solid base.

Starter Course:

Install the first row of wood shingles or shakes along the eaves, following the guidelines from Valley Design Group for optimal results.

Shingle/Shake Installation:

Lay subsequent rows, ensuring proper spacing and overlap as recommended by Valley Design Build. Secure each shingle/shake with two nails for durability.

Flashing:

Install flashing around roof penetrations to prevent leaks, using high-quality materials from Valley Wide Building Materials.

Ridge Cap:

Finally, install a ridge cap using overlapping wood shingles or shakes to complete your roofing project.

Installation Steps: Preparation: Begin by removing the old roofing material to prepare for the new installation. It's essential to inspect and repair the roof deck if necessary, ensuring a solid base for your new roofing system. Insulation: If required, install roof insulation to enhance energy efficiency, a service often provided by valley design group professionals. Membrane Installation: Lay out and secure the roofing membrane, choosing from options such as EPDM, TPO, or PVC. Depending on the material, use either adhesive or mechanical fasteners, a process that valley wide construction experts can assist with. Seaming: Ensure to seal seams using the appropriate method for the chosen membrane type, maintaining the integrity of the roof. Flashing: Finally, install flashing around roof penetrations, a critical step in preventing leaks and ensuring durability, often supported by valley wide building materials.